SA2C Invisible Speaker
Description
The Sound Advance® SA2C, the world's first invisible in-wall loudspeaker, is a two-way, full range planar loudspeaker system designed for use in commercial installations (for residential installations we recommend the SA2 invisible speaker). Proprietary structural and engineering features make it possible to invisibly install the SA2C in almost any standard wood/metal stud wall or ceiling. The speaker essentially becomes an integral part of the wall or ceiling surface.
Specifications
- Radiating Surface
- 294.0 sq. in (1869 sq.cm) planar diaphragm
- Tweeter System
- 0.82 lb (0.37kg) magnet with 1.02" (26mm) voice coil; 12dB/octave high-pass crossover @ 2kHz
- Woofer System
- 0.82 lb (0.37kg) magnet with 1.02" (26mm) voice coil; 12dB/octave low-pass crossover
- Frequency Response
- 70Hz – 20kHz ±4dB
- Power Rating
- 60 watts RMS as per EIA standard RS-426-A
- Sensitivity
- 90dB (1 meter)
- Impedance
- 4 ohms nominal, 3.5 onms minimum
- Transformer
- Primary voltage - 70.7 volts; Primary taps - 0.5, 1, 2, 4, 8, 16, 32 watts; 4 ohm bypass
- Dispersion
- 140° hemispherical, up to 20kHz
- Finish
- Primed surface ready to receive supplied vellum overlay
- Overload Protection
- Two independent self-resetting gel switches (low frequency and high frequency)
- Included Supplies
- Vellum overlay, joint compound, overlay adhesive, measuring cup, rubber standoffs, screws, washers, hex key
- Dimensions WxHxD
- 14" x 21" x 3" (350mm x 534mm x 76mm)
- Product Weight
- 7.7lbs (3.5kg) each
- Shipping Weight
- 16lbs (7.3kg) each, including finishing supplies and vellum overlay