SONARRAY
- Complete outdoor landscape system with flexibility for configurations of eight Satellite speakers and one Subwoofer up to sixteen Satellite speakers and two Subwoofers on a single amplifier.
- Perfectly even coverage and high quality sound in areas of 2500 sq.ft (232 sq.m) up to 5000 sq. ft (464 sq. m).
- Satellite speakers designed to hide within the landscape.
- Below-ground subwoofer with canopy hidden under foliage.
- Runs off a standard 2-channel power amplifier or stereo receiver.
- Daisy-chain wiring configuration for simple installation with 14 gauge, 4 conductor wire.
- Designed to handle extreme conditions.
SONARRAY SR1 System w/ Amplifier
Woofer
Satellite
Frequency Response
Impedance
Dispersion
Power Handling
Sensitivity
Enclosure Material
Crossover Frequency
Shipping Weight
Satellite Dimensions
Included Accessories
Installation Best Practice
Subwoofer Dimensions
Amp Dimensions (with feet)
Amp Dimensions (rack mounted)
Amp Output Power (8 Ohm)
Amp Output Power (4 Ohm)
SONARRAY SR1 System
Woofer
1 ea - 8" (203mm) dual voice coil, polyproylene cone & Santoprene™ surround
Satellite
8 ea - 3 1/2" (89mm) anodized aluminum cone & Santoprene™ surround
Frequency Response
40Hz - 20kHz ±3dB
Impedance
8 ohms per channel nominal
Dispersion
60º dispersion with an optimum listening area 8'-20' (2.4-6.1 meters) from the satellites
Power Handling
50 watts minimum; 150 watts system
Sensitivity
85dB and 89dB SPL, satellite and subwoofer respectively, 2.83V / 1 meter
Enclosure Material
Satellites - Non-corroding, high-heat ABS sealed enclosures; Woofer - High density Polyethylene (HDPE) non-corroding sealed enclosure
Crossover Frequency
100Hz
Shipping Weight
68 lbs (31kg) each
Satellite Dimensions
6 1/2" L x 4 1/8" Dia. (165mm x 105mm)
Included Accessories
Eight ground stakes, 24 silicone filled wire nuts
Installation Best Practice
Placement Recommendations:
Satellites- 6'-8' (1.8-2.4 meters) apart along perimeter of listening area.
Woofer- The center of the eight satellites.
Listening Area:
Up to 2000 square feet.
Wire Recommendations:
18 gauge up to 100' (33 meters) 4 conductor, stranded, direct burial
16 gauge up to 150' (50 meters) 4 conductor, stranded, direct burial
14 gauge up to 250' (80 meters) 4 conductor, stranded, direct burial
12 gauge up to 600' (192 meters) 4 conductor, stranded, direct burial
Specifications subject to change. Direct burial cable required (sold separately).
Subwoofer Dimensions
22" L x 15" Dia. x (559mm x 381mm)
Amp Dimensions (with feet)
8 5/8"W x 2 1/8"H x 16 13/16"D (219mm x 54mm x 427mm)
Amp Dimensions (rack mounted)
8 5/8"W x 1 3/4"H x 16 13/16"D (482mm x 44mm x 427mm)
Amp Output Power (8 Ohm)
125 Watts RMS per channel (2 channels driven)
Amp Output Power (4 Ohm)
200 Watts RMS per channel (2 channels driven)
SONARRAY SR1 Subwoofer
Woofer
Frequency Response
Crossover Frequency
Power Handling
Sensitivity
Enclosure Material
Dimensions (LxDia.)
Wire Recommendations
Shipping Weight
SONARRAY SR1 Subwoofer
$600 each
Woofer
8" (203mm) dual voice coil, polypropylene & Santoprene surround
Frequency Response
40Hz - 100Hz +/-3dB
Crossover Frequency
100Hz
Power Handling
150 Watts
Sensitivity
89dB Sensitivity @ 2.83V / 1 meter
Enclosure Material
High Density Polyethylene (HDPE) non-corrosive sealed enclosure
Dimensions (LxDia.)
22" x 15" (559mm x 381mm)
Wire Recommendations
18 gauge - up to 100 ft. (30m)16 gauge - up to 150 ft. (45m)14 gauge - up to 200 ft. (80m)12 gauge - up to 400 ft. (122m)10 gauge - up to 650 ft. (198m)
Shipping Weight
30 lbs (14kg)
SONARRAY SR1 Sat 4 Pack
Dimensions
Shipping Weight
Woofer
Sensitivity
Enclosure Material
SR1 SAT 4 PACK
$1000 each
Dimensions
6 1/2" L x 4 1/8" Dia. (165mm x 105mm)
Shipping Weight
9.85 lbs (4.47 kg)
Woofer
3 1/2" (98mm) anodized aluminum cone & Santoprene™ surround
Sensitivity
85dB 2.83V / 1 meter
Enclosure Material
Non-corrosive, high-heat ABS sealed enclosure
Accessories
Related Products
Downloads