Professional Series 4" In-Ceiling Speaker

PS-C41RT 4" In-Ceiling Speaker

Sonance Professional Series PS-C41RT is a 70V/100V/8 Ohm selectable In-Ceiling Speaker that features a one-piece bezel-less grille that is magnetically secured and allows for a one-step painting process to simplify installation and minimize visual distraction.

The optional Square Grille Adapter allows speakers to match the aesthetic of square downlights and HVAC grilles to achieve continual sight lines.

The PS-C41RT features a 4” polypropylene cone, butyl rubber surround woofer combined with a coaxially mounted .75” cloth dome, ferrofluid cooled high tweeter.

The PS-C41RT features extremely flat response for natural musically and intelligibility for voice, making it perfect for shopping malls, airports, schools, corporate, government, or anywhere an affordably-priced, aesthetically pleasing, and excellent sounding loudspeaker is required.

A full-fidelity transformer delivers uncompromised sonic performance in either high (70V, 100V) or low (8 Ohm) impedance.

Additionally, the Sonance PS-C41RT is certified for UL2043, UL1480, as well as EN54-24.


 

 

Frequency Range (-10dB)
Frequency Range (-3dB)
Power Capacity
Nominal Sensitivity
Nominal Coverage Angle
Directivity Factor (Q)
Directivity (DI)
Rated Maximum SPL
Rated Impedance
Transformer Taps
Crossover Point
Overall Dimensions
Cut Out Dimensions
Net Weight
Shipping Weight
Unit of Measure
Grille
LF Driver
HF Driver
Input Connector
Knockout
Safety Agency
Ceiling Thickness Range
Suspension Points
Included Accessories
PS-C41RT PS-C41RT PS-C41RT PS-C41RT

PS-C41RT

 

Frequency Range (-10dB)
70Hz – 25khz
Frequency Range (-3dB)
95Hz – 20kHz
Power Capacity
60 Watts Continuous Program Power | 30 Watts Continuous Pink Noise 
Nominal Sensitivity
87dB
Nominal Coverage Angle
120 degrees conical coverage
Directivity Factor (Q)
7.6
Directivity (DI)
8.1dB
Rated Maximum SPL
102dB @ 1 meter (3.3 feet) average, 108dB peak
Rated Impedance
8 Ohms nominal, 6 Ohms minimum
Transformer Taps
25W, 12.5W, 6.3W and (3.2W @70V)
Crossover Point
3000Hz
Overall Dimensions
6.3" x 6.5” deep (160mm x 165mm)
Cut Out Dimensions
5.875" Diameter (149mm)
Net Weight
5.0lbs (2.27kg) ea
Shipping Weight
 21.55lbs (9.77kg) pair
Unit of Measure
Pair (Single units upon request)
Grille
Supplied with bezel-less white grille. Optional black grille, or square adapter with black or white grille 
LF Driver
4" (100mm) Polypropylene Cone, Butyl Rubber Surround
HF Driver
.75" (19mm) Cloth dome, Ferrofluid cooled
Input Connector
Four pin, Euroblock with loop output connections
Knockout
Single .75" with cable relief
Safety Agency
UL 2043, UL 1480, NFPA 90A and NFPA 70, S7232, (EN54-24 coming soon)
Ceiling Thickness Range
.125” - 2.0” (3mm - 50mm)
Suspension Points
One, on top surface
Included Accessories
Bracket/Tile Bridge

Accessories

Black Round Grille

Black Round Grille

White Square Adapter

White Square Adapter

Black Square Adapter

Black Square Adapter

Replacement White Round Grille

Replacement White Round Grille