6.5" LOW PROFILE IN-CEILING SPEAKER

6.5" Low Profile In-Ceiling Speaker

Sonance Professional Series PS-C63RTLP is a 70V/100V/8 Ohm selectable In-Ceiling Speaker that features a shallow 4.37” (111mm) construction for installations in restricted spaces such as beneath HVAC ducting. It also features a one-piece bezel-less grille that is magnetically secured and allows for a one-step painting process to simplify installation and minimize visual distraction.

The optional Square Grille Adapter allows speakers to match the aesthetic of square downlights and HVAC grilles to achieve continual sight lines.

A high-excursion 6.5” polypropylene woofer delivers effortless low bass extension, even at high volumes, while the pivoting chambered 1” soft dome tweeter can be directed to ensure accurate coverage, when speaker positioning is compromised.

The PS-C63RTLP features a sealed metal enclosure with back and side knock-outs, removable Euroblock connector with loop-through, and seismic attachment. Additionally, the Sonance PS-C63RTLP is certified for UL 1480 and UL 2043.


 

 

Frequency Range (-10dB
Frequency Range (-3dB)
Power Capacity
Nominal Sensitivity
Nominal Coverage Angle
Directivity Factor (Q)
Directivity (DI)
Rated Maximum SPL
Rated Impedance
Transformer Taps
Crossover Point
Overall Dimension
Cut Out Dimension
Net Weight
Shipping Weight
Unit of Measure
Grille
LF Driver
HF Driver
Input Connector
Knockout
Safety Agency
Maximum Ceiling Thickness
Suspension Points
PS-C63RTLP PS-C63RTLP PS-C63RTLP PS-C63RTLP

PS-C63RTLP

 

Frequency Range (-10dB
49Hz - 25kHz
Frequency Range (-3dB)
65Hz - 20kHz
Power Capacity
120 Watts Continuous Program Power | 60 Watts Continuous Pink Noise
Nominal Sensitivity
91dB
Nominal Coverage Angle
120 degrees conical coverage
Directivity Factor (Q)
6.5
Directivity (DI)
7.9dB
Rated Maximum SPL
108dB @ 1 meter (3.3 feet) average, 116dB peak
Rated Impedance
8 Ohms nominal, 6 Ohms minimum
Transformer Taps
60W, 30W, 15W (7.5W 70V)
Crossover Point
2750Hz
Overall Dimension
11.06” Diameter x 4.37” Depth (281mm x 111mm)
Cut Out Dimension
10.125” Diameter (257mm)
Net Weight
10.00lbs (4.53kg) each (Preliminary spec - may vary)
Shipping Weight
38.00lbs (17.23kg) pair  (Preliminary spec - may vary)
Unit of Measure
Pair (Single units upon request)
Grille
Supplied with bezel-less white grille. Optional black grille, or square adapter with black or white grille
LF Driver
6.5” (165mm) Polypropylene Cone, Butyl Rubber Surroun
HF Driver
1” (25mm) Cloth Dome, Pivoting, Ferrofluid cooled
Input Connector
Four pin Euroblock with loop output connections
Knockout
One back-mounted, one side-mounted .75" (19mm)
Safety Agency
UL 1480, UL 2043, NFPA 90A, NFPA 70
Maximum Ceiling Thickness
1.732” (44mm) 
Suspension Points
One, on top surface

Accessories

Black Round Grille

Black Round Grille

White Square Adapter

White Square Adapter

Black Square Adapter

Black Square Adapter

Replacement White Round Grille

Replacement White Round Grille