PS-P43T 4" PENDANT

4" Pendant Speaker

Sonance Professional Series PS-P43T Pendant Speaker utilizes a minimalistic design similar to pendant lighting to blend discreetly into the environment, and take advantage of the same one-piece grille design as the In-Ceiling Speakers to deliver consistent sight lines when installed in the same space.

The integrated top cover hides the hanging hardware and wiring connector.

A high-excursion 4” polypropylene woofer delivers effortless low bass extension, that exceeds most 6.5" and even 8" competitive products, while the pivoting chambered 1” soft dome tweeter can be directed to ensure accurate coverage, when speaker positioning is compromised.

A full-fidelity transformer delivers uncompromised sonic performance in either high (70V, 100V) or low (8 Ohm) impedance.

Additionally, the Sonance PS-P43T is certified for UL 1480 and UL 2239.

Available in either black or white (paintable).


 

 

Frequency Range (-10dB)
Frequency Range (-3dB)
 Power Capacity
Nominal Sensitivity
Nominal Coverage Angle
Directivity Factor (Q)
Directivity (DI)
Rated Maximum SPL
Rated Impedance
Transformer 
Crossover Point
Overall Dimension
Net Weight
Shipping Weight
Unit of Measure
Color
Grille
LF Driver
HF Driver
Input Connectors
Safety Agency
Suspension Points
Supplied Hanging Hardware
PS-P43T PS-P43T

PS-P43T

 

Frequency Range (-10dB)
57Hz – 25kHz
Frequency Range (-3dB)
75Hz – 20kHz
 Power Capacity
60 Watts Continuous Program Power | 30 Watts Continuous Pink Noise 
Nominal Sensitivity
87dB
Nominal Coverage Angle
120 degrees conical coverage
Directivity Factor (Q)
7.6
Directivity (DI)
8.1dB
Rated Maximum SPL
105dB @ 1 meter (3.3 feet) average, 110dB peak
Rated Impedance
8 Ohms nominal, 6 Ohms minimum
Transformer 
30W, 15W, 7.5W (3.8W 70V)
Crossover Point
3000Hz
Overall Dimension
6.3” Diameter x 11” Depth (160mm x 280mm)
Net Weight
6.45lbs (2.93kg) each
Shipping Weight
18.92lbs (8.58kg) pair
Unit of Measure
Pair (Single upon request)
Color
Black or White
Grille
Bezel-less, powder coated, magnetically retained grille
LF Driver
4” (100mm) Polypropylene Cone, Butyl Rubber Surround
HF Driver
1” (25mm) Cloth Dome, Pivoting, Ferrofluid cooled
Input Connectors
Four, pin Euroblock with loop output connections
Safety Agency
UL 1480, UL 2239
Suspension Points
Five points, top mounted 
Supplied Hanging Hardware
16.4’ (5m) Stainless Steel Cable with Snaphook x 4, Gripple Hanger x 2, Gripple Adjustment Tool x 2