8" PENDANT WOOFER

8" Pendant Woofer

Sonance Professional Series PS-P83WT is a 70V/100V/8 Ohm selectable Pendant Speaker that utilizes a minimalistic design similar to pendant lighting to blend discreetly into the environment. It takes advantage of the same one-piece grille design as the In-Ceiling Speakers to deliver consistent sight lines when installed in the same space.

The integrated top cover hides the hanging hardware and wiring connector.

An ultra-high-excursion 8” polypropylene woofer delivers effortless and impactful low bass extension and augmentation, at any sound pressure level, making it the perfect partner for the PS-P43T and PS-P63T Pendant Speakers.

A full-fidelity transformer delivers uncompromised sonic performance in either high (70V, 100V) or low (8 Ohm) impedance.

Additionally, the Sonance PS-P83WT is certified for UL 1480 and UL 2239.

Available in either black or white (paintable).


 

 

Frequency Range (-10dB)
Frequency Range (-3dB)
Power Capacity
Nominal Sensitivity
Nominal Coverage Angle
Directivity Factor (Q)
Directivity (DI)
Rated Maximum SPL
Rated Impedance
Transformer Taps
Crossover Point
Overall Dimension
Net Weight
Shipping Weight
Unit of Measure
Color
Grille
LF Driver
HF Driver
Input Connectors
Safety Agency
Suspension Points
Supplied Hanging Hardware
PS-P83WT PS-P83WT

PS-P83WT

 

Frequency Range (-10dB)
32Hz – 300Hz
Frequency Range (-3dB)
50Hz – 150Hz
Power Capacity
200 Watts Continuous Program Power | 125 Watts Continuous Pink Noise   
Nominal Sensitivity
89dB
Nominal Coverage Angle
180 degrees conical coverage
Directivity Factor (Q)
N/A
Directivity (DI)
N/A
Rated Maximum SPL
110dB @ 1 meter (3.3 feet) average, 116dB peak
Rated Impedance
8 Ohms nominal, 6 Ohms minimum
Transformer Taps
120W, 60W, 30W (15W 70V)
Crossover Point
150Hz
Overall Dimension
11.06” Diameter x 19.7” Depth (281mm x 500mm)
Net Weight
17.71lbs (8.03kg) each
Shipping Weight
22.97lbs (10.42kg) each
Unit of Measure
Each
Color
Black or White
Grille
Bezel-less, powder coated, magnetically retained grille
LF Driver
8” (203mm) Polypropylene Cone, Butyl Rubber Surround
HF Driver
N/A
Input Connectors
Four pin, Euroblock with loop output connections
Safety Agency
UL 1480, UL 2239
Suspension Points
Five points, top mounted 
Supplied Hanging Hardware
16.4’ (5m) Stainless Steel Cable with Snaphook x 2, Gripple Hanger x 2, Gripple Adjustment Tool x 1